HORIZONTAL PREMADE POUCH PACKAGING
Premade Pouch
Packing Machines
An automatic pouch packing machine for filling and sealing preformed pouches. This horizontal process feeds ready-made pouches, opens each pouch, fills the product and completes final sealing without making bags from rollstock film.
- PRE-FORMED POUCHES
- HORIZONTAL HANDLING
- PRODUCT-MATCHED FILLING
PROJECT FIT
START WITH THE POUCH, PRODUCT AND PROCESS
Is a Premade Pouch Packing Machine Right for Your Project?
An automatic premade pouch packing machine—also known as a premade pouch filling machine or premade pouch filling and sealing machine—handles pouches that have already been made. The suitable configuration is reviewed around the pouch sample, product behavior, filling requirement and the process functions your project needs.
CONFIRMED OPERATING PRINCIPLE
Preformed Pouches
The machine receives ready-made pouches, then feeds, picks and opens each pouch before filling and final sealing. It does not make bags from rollstock film.
- Provide for review
- Pouch sample, dimensions, material structure and bag-mouth details.
COMMON CONFIGURATION DIRECTION
Product-Matched Filling
A premade pouch filling machine is configured around the actual product. Granules, powders, liquids, pastes and counted products can require different feeding and dosing equipment.
- Review around
- Product flow, target fill amount, product condition and required packaging result.
PROJECT CONFIRMATION REQUIRED
Horizontal Packaging Process
An automatic premade pouch packing machine follows a horizontal process path: pouch feeding, pouch opening, product filling, optional functions and final sealing. The final station sequence depends on the confirmed project scope.
- Confirm before selection
- Target output, optional functions, line layout and installation conditions.
POUCH FORMATS
PREMADE POUCH PACKAGING OPTIONS
Supported Premade Pouch Formats
This premade pouch packing machine works with the supported formats below. Select a pouch to see the project details that guide pouch feeding, opening, filling and final sealing. Final configuration is based on the pouch sample and product requirement.
FEATURED POUCH FORMATS — SELECT A FORMAT TO REVIEW ITS PROJECT CONSIDERATIONS.
Product examples are packaging-direction references only. Final pouch and product suitability is confirmed by project review.
FLAT & SEALED FORMAT
Flat Three-Side-Seal Pouch
- Packaging direction
- A compact flat pouch with three sealed sides.
- Confirm for the project
- Pouch dimensions, seal area, material structure and pouch-mouth opening.
- Common product examples
- Seasonings, powdered drinks, confectionery and single-use samples.
SHELF-READY FORMAT
Stand-Up Pouch
- Packaging direction
- A stand-up pouch packing machine can be configured around this shelf-ready pouch format.
- Confirm for the project
- Bottom geometry, pouch stability, dimensions and finished fill requirement.
- Common product examples
- Snacks, granules, powders and pet food.
RESEALABLE FORMAT
Zipper Pouch
- Packaging direction
- A zipper pouch packing machine is reviewed around the pouch-mouth and reclosure structure.
- Confirm for the project
- Zipper position, opening behavior, seal clearance and pouch dimensions.
- Common product examples
- Coffee, nuts, snacks and pet treats.
SIMPLE POUCH FORMAT
Pillow Pouch
- Packaging direction
- A preformed pillow pouch can be evaluated for the required filling and final sealing process.
- Confirm for the project
- Pouch dimensions, material, opening orientation and finished package requirement.
- Common product examples
- Snacks, dry mixes, powders and granular products.
GUSSETED FORMAT
Side-Gusseted Pouch
- Packaging direction
- Expandable side gussets provide a more substantial pouch profile.
- Confirm for the project
- Gusset depth, pouch stiffness, gripping area and final seal position.
- Common product examples
- Coffee beans, tea, pet food and powders.
PREMIUM SHELF FORMAT
Flat-Bottom Pouch
- Packaging direction
- A structured pouch with a stable bottom presentation.
- Confirm for the project
- Bottom profile, pouch width, side structure and bag-mouth opening.
- Common product examples
- Coffee, premium granules, pet food and powders.
STRUCTURED FORMAT
Quad-Seal Pouch
- Packaging direction
- A structured pouch with reinforced side-seal presentation.
- Confirm for the project
- Side gussets, seam construction, pouch stiffness and sealing area.
- Common product examples
- Coffee, tea, pet food and granular products.
SPECIAL SHAPE FORMAT
Shaped Pouch
- Packaging direction
- A non-standard pouch outline can be reviewed for the required packaging process.
- Confirm for the project
- Gripping position, pouch outline, mouth opening and finished sealing area.
- Common product examples
- Personal-care products, sauces and liquid or paste products.
SPOUTED FORMAT
Spouted Pouch
- Packaging direction
- A spouted pouch filling and sealing machine configuration is reviewed around the pouch and filling requirement.
- Confirm for the project
- Spout position, cap handling, pouch material, product behavior and required fill volume.
- Common product examples
- Liquids, sauces, purees and personal-care products.
CARRY-HANDLE FORMAT
Doypack with Handle
- Packaging direction
- A stand-up pouch format with an integrated carry-handle feature.
- Confirm for the project
- Handle geometry, gripping position, pouch stability and final sealing requirement.
- Common product examples
- Detergent, pet food and larger-volume granular products.
APPLICATIONS
MATCH THE POUCH FORMAT TO THE PRODUCT YOU NEED TO PACK
Premade Pouch Packaging Applications by Product Type
Choose a product category to view a representative premade pouch packaging video and the pouch directions commonly considered for that application.
Select an application to load its representative process video.
YOUTUBE VIDEO READYVideo example: coffee beans packed in a quad-seal pouch.
Video example: powder packed in a zipper pouch.
Video example: laundry detergent filled into a stand-up pouch.
Video example: candy packed in a flat three-side-seal pouch.
Video example: liquid foundation packed into two shaped pouches per cycle.
Footage shows a representative packaging process only. Final machine configuration depends on the actual product, pouch and required packaging result.
GRANULES & SNACKS
Free-Flowing Products for Premade Pouches
- Representative products
- Coffee beans, nuts, candy, rice, seeds and pet food.
- Typical pouch directions
- Stand-up, zipper, quad-seal and flat-bottom pouches.
- Review for the project
- Product flow, target fill, pouch stability and final seal area.
POWDERS & DRY MIXES
Powder Products in Preformed Pouches
- Representative products
- Coffee powder, protein powder, flour, spices and drink mixes.
- Typical pouch directions
- Zipper, stand-up and three-side-seal pouches.
- Review for the project
- Powder behavior, dust control, target fill and seal cleanliness.
LIQUIDS & SAUCES
Liquid Premade Pouch Packaging
- Representative products
- Water-like liquids, oils, sauces and dressings.
- Typical pouch directions
- Stand-up, spouted and shaped pouches.
- Review for the project
- Product flow, pouch material, fill requirement and sealing condition.
COUNTED PRODUCTS
Small Products Packed by Count
- Representative products
- Confectionery, hardware, small accessories and similar items.
- Typical pouch directions
- Flat, zipper and three-side-seal pouches.
- Review for the project
- Product geometry, count requirement, handling and pouch dimensions.
SHAPED & SPECIAL POUCHES
Premade Pouch Packaging for Special Shapes
- Representative products
- Personal-care products, sauces, liquid products and premium retail packs.
- Typical pouch directions
- Shaped, spouted and other special-feature pouch formats.
- Review for the project
- Pouch outline, usable gripping area, pouch mouth and final seal result.
FILLING SYSTEMS
MATCH THE DOSING METHOD TO THE PRODUCT
Choose a Filling or Dosing System for Premade Pouches
Each premade pouch filling machine is paired with a filling or dosing system that suits the product’s flow characteristics, fill type and packaging result. The examples below are common configuration directions, not universal machine specifications.
01 · WEIGHED DOSING
Multihead Weigher
- Common direction
- Weight-based dosing for free-flowing products.
- Typical products
- Coffee beans, snacks, nuts, candy, rice and pet food.
- Confirm for project
- Product flow, product size, target fill and pouch stability.
02 · POWDER DOSING
Auger Filler
- Common direction
- Metered dosing for powders and dry mixes.
- Typical products
- Coffee powder, protein powder, flour, spices and drink mixes.
- Confirm for project
- Powder flow, dust control, target fill and seal cleanliness.
03 · LIQUID FILLING
Liquid Pump
- Common direction
- Liquid transfer and filling for suitable liquid products.
- Typical products
- Water-like liquids, oils, sauces, dressings and household liquids.
- Confirm for project
- Viscosity, foaming, product contact requirements and sealing result.
04 · COUNTED DOSING
Counting System
- Common direction
- Count-based feeding for discrete small products.
- Typical products
- Candy, hardware, small accessories and similar items.
- Confirm for project
- Product geometry, count requirement, handling and pouch dimensions.
05 · MULTI-COMPONENT FILLING
Combination Filling
- Common direction
- Sequenced filling where a pouch receives more than one component.
- Typical products
- Liquid with granules, sauces with inclusions and selected mixed products.
- Confirm for project
- Product sequence, interaction between components, pouch handling and final seal area.
WEIGHED DOSING
Multihead Weigher
- Common direction
- Weight-based dosing for free-flowing products.
- Typical products
- Coffee beans, snacks, nuts, candy, rice and pet food.
- Review for the project
- Product flow, product size, target fill and pouch stability.
POWDER DOSING
Auger Filler
- Common direction
- Metered dosing for powders and dry mixes.
- Typical products
- Coffee powder, protein powder, flour, spices and drink mixes.
- Review for the project
- Powder flow, dust control, target fill and seal cleanliness.
LIQUID FILLING
Liquid Pump
- Common direction
- Liquid transfer and filling for suitable liquid products.
- Typical products
- Water-like liquids, oils, sauces, dressings and household liquids.
- Review for the project
- Viscosity, foaming, product contact requirements and sealing result.
COUNTED DOSING
Counting System
- Common direction
- Count-based feeding for discrete small products.
- Typical products
- Candy, hardware, small accessories and similar items.
- Review for the project
- Product geometry, count requirement, handling and pouch dimensions.
MULTI-COMPONENT FILLING
Combination Filling
- Common direction
- Sequenced filling where a pouch receives more than one component.
- Typical products
- Liquid with granules, sauces with inclusions and selected mixed products.
- Review for the project
- Product sequence, interaction between components, pouch handling and final seal area.
PACKING PROCESS
FROM PREMADE POUCH TO FINISHED PACK
Premade Pouch Packing Process and Optional Functions
A preformed pouch filling and sealing machine receives already-made pouches, opens and fills them, then completes final sealing. The station sequence can include project-specific functions between filling and final sealing.
PROCESS MAP
How Premade Pouches Move Through the Packing Process
Premade pouch filling machines handle ready-made pouches from bag feeding and opening to filling, sealing and discharge. They do not make bags from rollstock film.- Bag feedingPremade pouches are supplied to the machine.
- Bag openingThe pouch is opened ready for filling.
- Product fillingThe selected dosing or filling system transfers the product.
- Bag expandingThis step can support product settling or pack preparation.
- Heat sealingThe pouch is sealed for the confirmed material and package requirement.
- Bag shapingThe finished pouch is stabilised and discharged.
Pouch Opening Assistance
Additional opening support may be considered for stand-up, gusseted or difficult-to-open pouches so the pouch mouth is ready before filling.
Seal-Area Cleaning
This option is useful where powder, granules or product residue could enter the seal zone and affect the finished seal.
Zipper and Gusset Handling
Zipper-opening or bottom-opening support may be reviewed when a pouch style needs its mouth or base prepared before filling.
Product Coding
A date or lot-code unit can be positioned to apply traceability information to the pouch at a suitable point in the line.
Dust Collection and Clean Filling
For powders and light granules, extraction or a controlled filling interface can keep the pouch mouth and seal area cleaner.
Product Settling
Tapping or vibration may be considered when the product needs to settle inside the pouch before final sealing.
Gas Flush and Air Removal
Gas flushing or air removal may be relevant when headspace control or product protection is part of the packaging requirement.
Pouch Detection and Discharge
Detection and discharge handling can be reviewed to identify pouch-position issues and transfer completed pouches to downstream equipment.
MODELS & SPECIFICATIONS
PREMADE POUCH MACHINE PLATFORM REFERENCE
Compare Premade Pouch Packing Machine Specifications
Review pouch width, pouch length, packing speed and indicative fill range across the listed premade pouch packing machine platforms. Metric and US customary units are shown together for fast global reference.
| Specification | Model 160 | Model 210 | Model 260 | Model 320 | Model 350 | Model 450 |
|---|---|---|---|---|---|---|
| Bag width mm / in |
55–160 2.17–6.30 | 100–210 3.94–8.27 | 140–260 5.51–10.24 | 180–320 7.09–12.60 | 220–350 8.66–13.78 | 250–450 9.84–17.72 |
| Bag length mm / in |
80–260 3.15–10.24 | 100–360 3.94–14.17 | 140–380 5.51–14.96 | 200–420 7.87–16.54 | 220–460 8.66–18.11 | 250–500 9.84–19.69 |
| Packing speed* bags / min |
5–55 | 5–45 | 5–45 | 5–35 | 5–35 | 5–30 |
| Indicative fill range** mL / fl oz |
5–500 0.17–16.9 | 50–1,000 1.69–33.8 | 200–2,000 6.76–67.6 | 200–2,000 6.76–67.6 | 500–3,000 16.9–101.4 | 500–4,500 16.9–152.2 |
| Compressed-air consumption m³/min / CFM |
0.35 12.4 | 0.45 15.9 | 0.55 19.4 | 0.55 19.4 | 0.65 23.0 | 0.75 26.5 |
| Main power kW / hp |
2.5 3.4 | 3.5 4.7 | 3.5 4.7 | 3.5 4.7 | 4.0 5.4 | 4.5 6.0 |
| Power supply | 380 V · Three-phase · 50 / 60 Hz Alternative electrical requirements can be reviewed for the destination market. | |||||
- Bag width
- 55–160 mm 2.17–6.30 in
- Bag length
- 80–260 mm 3.15–10.24 in
- Packing speed*
- 5–55 bags/min
- Indicative fill range**
- 5–500 mL 0.17–16.9 fl oz
- Compressed air
- 0.35 m³/min 12.4 CFM
- Main power
- 2.5 kW 3.4 hp
- Bag width
- 100–210 mm 3.94–8.27 in
- Bag length
- 100–360 mm 3.94–14.17 in
- Packing speed*
- 5–45 bags/min
- Indicative fill range**
- 50–1,000 mL 1.69–33.8 fl oz
- Compressed air
- 0.45 m³/min 15.9 CFM
- Main power
- 3.5 kW 4.7 hp
- Bag width
- 140–260 mm 5.51–10.24 in
- Bag length
- 140–380 mm 5.51–14.96 in
- Packing speed*
- 5–45 bags/min
- Indicative fill range**
- 200–2,000 mL 6.76–67.6 fl oz
- Compressed air
- 0.55 m³/min 19.4 CFM
- Main power
- 3.5 kW 4.7 hp
- Bag width
- 180–320 mm 7.09–12.60 in
- Bag length
- 200–420 mm 7.87–16.54 in
- Packing speed*
- 5–35 bags/min
- Indicative fill range**
- 200–2,000 mL 6.76–67.6 fl oz
- Compressed air
- 0.55 m³/min 19.4 CFM
- Main power
- 3.5 kW 4.7 hp
- Bag width
- 220–350 mm 8.66–13.78 in
- Bag length
- 220–460 mm 8.66–18.11 in
- Packing speed*
- 5–35 bags/min
- Indicative fill range**
- 500–3,000 mL 16.9–101.4 fl oz
- Compressed air
- 0.65 m³/min 23.0 CFM
- Main power
- 4.0 kW 5.4 hp
- Bag width
- 250–450 mm 9.84–17.72 in
- Bag length
- 250–500 mm 9.84–19.69 in
- Packing speed*
- 5–30 bags/min
- Indicative fill range**
- 500–4,500 mL 16.9–152.2 fl oz
- Compressed air
- 0.75 m³/min 26.5 CFM
- Main power
- 4.5 kW 6.0 hp
Power supply: 380 V · Three-phase · 50 / 60 Hz. Alternative electrical requirements can be reviewed for the destination market.
* Packing speed is an indicative operating range. Actual output is confirmed from the pouch, product behaviour, filling system and selected functions.
** Fill range is a reference value. The final dosing range is selected with the applicable filler and product.
MODEL SELECTION GUIDE
How to Choose a Premade Pouch Packing Machine Model
Use these three checks to narrow the relevant premade pouch packing machine model range.- Pouch width and lengthStart with the usable pouch size range and pouch opening requirements.
- Product and filling methodMatch the product behaviour with the appropriate pouch filling system.
- Required output and optional functionsReview the target output, process needs and selected optional functions.
TECHNICAL FAQ
BUYER QUESTIONS, ANSWERED
Premade Pouch Packing Machine FAQs
Practical answers about pouch compatibility, filling systems, output, optional functions and after-sales support.
What Is the Difference Between a Premade Pouch Packing Machine and a VFFS Machine?
A premade pouch packing machine picks, opens, fills and seals pouches that have already been manufactured. A Vertical Form Fill Seal (VFFS) machine forms bags from rollstock film before filling and sealing. The right route depends on whether your packaging is supplied as finished pouches or film rolls.
Explore Vertical Form Fill Seal Machines →How Do I Choose the Right Premade Pouch Packing Machine Model?
Start with pouch dimensions, then match the product and filling method, followed by the required output and optional functions. The specification table supports initial comparison; the selected model must suit the pouch and product that will actually run.
What Production Speed Can I Expect from a Premade Pouch Packing Machine?
The listed packing speed is an indicative range, not a fixed result. Actual output changes with pouch size and format, product flow, fill weight or volume, selected filler, optional functions and the required sealing result.
Can It Handle Zipper, Spout or Shaped Pouches?
These formats can require additional review because zipper position, spout location, gripping area, pouch stiffness and opening behaviour affect handling. Confirm the pouch sample, drawing and required filling route before selecting the configuration.
Can One Premade Pouch Packing Machine Handle Different Pouch Sizes and Formats?
A machine model is selected around its pouch width and length range, gripper arrangement and opening requirements. Flat, stand-up, zipper, gusseted, shaped and spouted pouches may need different handling details, so the actual pouch sample or drawing should be reviewed first.
Which Filling System Is Suitable for My Product?
Free-flowing granules are commonly matched with a multihead weigher; powders and dry mixes may use an auger filler; suitable liquids can use a pump; and discrete items can use a counting system. Mixed products may need sequenced or combination filling.
Can the Machine Pack Powders Without Contaminating the Seal Area?
Powder projects should be reviewed for powder flow, dust behaviour, filling interface and seal-area cleanliness. Dust collection, controlled filling and related functions may be considered where the product could affect the pouch mouth or final seal.
What Warranty, Spare Parts and After-Sales Support Are Available?
The machine is covered by a 12-month warranty from the date it is received. A one-year spare-parts package is supplied according to the confirmed machine configuration. Remote technical support is available, and paid on-site installation and commissioning services can be arranged when required.
PROJECT ENQUIRY
REQUEST A CONFIGURATION REVIEW
Tell Us About Your Pouch Packing Project.
You do not need to have every specification confirmed. Send the information currently available, and we will review a suitable premade pouch packing machine direction for your product and pouch.
USEFUL INFORMATION TO SHARE
- 01
Product & Target FillProduct characteristics and required weight or volume per pouch
- 02
Pouch Format & SizePremade pouch type, width, length and opening details
- 03
Target OutputExpected pouches per minute or per hour
- 04
Available SamplesPouch sample, drawing, product photo or existing line layout
Prefer to contact us directly?